GOULDS 2ST1F2D4 Npe Centrifugal Pump Phase Bluffton Weg 1.5 Bluffton/weg 3450RPM

( Brand: Goulds ), ( Manufacturer Part Number: 2ST1F2D4 ), ( Part Type: Hp Pump )

Review GOULDS Npe 1.5 Hp Centrifugal Pump Phase Bluffton/weg 3450rpm Tested

The **Goulds 2ST1F2D4 NPE 1.5 HP Centrifugal Pump**, a robust and high-performance model from the trusted Goulds Pumps brand, is an ideal solution for a wide range of industrial, commercial, and municipal applications requiring reliable fluid transfer. Engineered with precision and built to endure demanding operating conditions, this pump features a **Bluffton-style casing** a design known for its durability and efficiency paired with a **WEG 3450 RPM motor**, ensuring consistent performance across various system pressures and flow rates. The **1.5 horsepower** electric motor provides sufficient power for moderate to heavy-duty applications, such as water supply systems, irrigation, HVAC cooling towers, fire protection, and general-purpose liquid transfer, including clean water, chemicals, and light slurries (depending on material compatibility). Its **NPE (Non-Clogging, Efficient) series** designation highlights its ability to handle slightly abrasive or fibrous materials without clogging, making it versatile for applications where standard pumps might struggle.

The pump s **closed impeller design** enhances efficiency by reducing turbulence and energy loss, while its **vertical shaft, end-suction configuration** allows for compact installation in tight spaces, minimizing footprint requirements. Constructed from **cast iron** for the casing and shaft sleeve, along with **stainless steel** components where necessary, this pump offers excellent resistance to corrosion and wear, extending its operational lifespan even in moderately corrosive environments. The **mechanical seal assembly** ensures leak-free performance, reducing maintenance downtime and fluid loss, while the **ball-bearing support** on the shaft provides smooth, vibration-dampened operation, contributing to longer bearing life and quieter performance. With a **flow rate capacity of up to approximately 1,200 gallons per minute (GPM)** and a **head range of around 100 feet**, this pump strikes an optimal balance between efficiency and power, making it suitable for both new installations and retrofits in systems requiring reliable, low-maintenance fluid movement.

Designed with **user convenience in mind**, the Goulds 2ST1F2D4 incorporates a **standard NEMA motor mount**, simplifying integration with existing electrical systems, while its **pre-assembled components** including the motor, shaft, and impeller streamline installation and reduce on-site assembly time. The pump s **adjustable diffuser and volute design** allows for fine-tuning of performance characteristics to match specific system demands, whether optimizing for higher flow rates or greater pressure output. Additionally, Goulds reputation for **superior aftermarket support** ensures that replacement parts, technical documentation, and service assistance are readily available, further enhancing its long-term reliability. Whether deployed in a municipal water treatment facility, a commercial building s plumbing system, or an industrial process line, the Goulds 2ST1F2D4 NPE delivers **consistent, dependable performance** with minimal operational hassle, making it a cost-effective choice for applications where reliability and efficiency are paramount.

### **Pros and Cons of buying a Goulds 2ST1F2D4 NPE 1.5 HP Centrifugal Pump (Bluffton/WEG, 3450 RPM)**

#### **Pros**

1. **Reliable Brand and Proven Performance**

- Goulds Pumps is a well-established manufacturer with a long history of producing durable centrifugal pumps. The NPE series is known for its robust construction and consistent performance in industrial applications.

- The WEG motor (3450 RPM) is a reputable brand with good efficiency and reliability, reducing the risk of frequent motor failures.

2. **Appropriate Horsepower for Moderate Applications**

- Water supply systems

- Irrigation

- Light industrial processes

- HVAC cooling systems

- Small-scale wastewater transfer

- It avoids overkill for small-scale needs while still providing sufficient capacity for basic fluid movement.

3. **Standardized and Easy to Maintain**

- The 2ST1F2D4 is a common model, meaning spare parts (impellers, seals, bearings) are widely available.

- The NPE series is designed for ease of maintenance, with accessible components and straightforward disassembly procedures.

- The centrifugal design is simpler than positive displacement pumps, reducing wear and tear in clean or mildly abrasive fluids.

4. **Energy Efficiency Considerations**

- While not the most energy-efficient pump on the market, the WEG motor is reasonably efficient for its class. For many small applications, the energy savings may not justify a premium pump.

- If paired with a variable frequency drive (VFD), efficiency can be improved for variable flow applications.

5. **Affordable Upfront Cost**

- Compared to larger or more specialized pumps, the 1.5 HP Goulds NPE is relatively inexpensive, making it a cost-effective choice for budget-conscious buyers.

- The initial purchase price is lower than high-efficiency or premium brands, which may be unnecessary for basic applications.

6. **Compatibility with Common Systems**

- The pump s dimensions and mounting options (e.g., baseplate, flange connections) align with standard industrial and commercial piping setups.

- It can be easily integrated into existing systems without requiring major modifications.

---

#### **Cons**

1. **Limited Flow and Head Capacity**

- At 1.5 HP, this pump is not suitable for high-flow or high-head applications. Its maximum flow and head ratings (typically around 10 20 GPM and 50 100 feet, depending on specific conditions) may be insufficient for larger-scale operations.

- If the application requires significantly higher performance, a larger pump (e.g., 2.5 HP or higher) would be necessary, increasing costs.

2. **Potential for Wear in Abrasive or Dirty Fluids**

- While the NPE series is durable, prolonged exposure to abrasive particles (e.g., sand, silt) can accelerate wear on the impeller and casing.

- Without proper filtration or regular maintenance, the pump s lifespan may be shortened, leading to higher long-term costs.

3. **Lower Energy Efficiency Compared to Premium Models**

- The pump does not feature advanced efficiency technologies (e.g., high-efficiency impellers, optimized casings) found in newer or premium centrifugal pumps.

- Over time, operating costs may be higher than with a more efficient pump, especially in continuous-use applications.

4. **Dependence on Proper Installation and Alignment**

- Like all centrifugal pumps, the Goulds 2ST1F2D4 requires precise installation, including proper shaft alignment and sealing to prevent leaks or premature failure.

- Poor installation can lead to vibration, reduced efficiency, or mechanical damage, negating the pump s reliability.

5. **Limited Warranty Compared to Some Competitors**

- Goulds typically offers a standard warranty (often 1 2 years), which may be shorter than warranties provided by some competitors (e.g., Grundfos, KSB).

- Extended warranties or service contracts may be required for critical applications, adding to the total cost of ownership.

6. **Noise and Vibration in Some Applications**

- Centrifugal pumps can generate noise and vibration, particularly if the system is not properly balanced or if the pump is operating near its maximum capacity.

- In sensitive environments (e.g., residential or quiet industrial zones), this may require additional soundproofing or vibration dampening measures.

7. **Outdated Design Relative to Modern Alternatives**

- Newer centrifugal pump technologies (e.g., magnetic drive pumps, high-efficiency impellers) offer better sealing, reduced maintenance, and improved efficiency.

- While the Goulds NPE is still functional, it may lack features that could extend its lifespan or reduce operational costs in the long run.

---

### **Ending Conclusion**

The Goulds 2ST1F2D4 NPE 1.5 HP centrifugal pump (Bluffton/WEG, 3450 RPM) is a **practical and cost-effective choice for small-scale, low-to-moderate flow applications** where reliability and simplicity are prioritized over energy efficiency or high performance. It excels in basic water transfer, irrigation, or light industrial uses where the pump s limitations in flow and head are not critical. The combination of a trusted brand (Goulds) and a dependable motor (WEG) ensures durability, while its standardized design makes maintenance straightforward.

However, for applications requiring **higher flow rates, greater efficiency, or exposure to abrasive fluids**, this pump may fall short. In such cases, investing in a slightly larger or more advanced model (e.g., a 2.5 HP pump with a VFD or a magnetic drive pump) could offer better long-term performance and cost savings. Additionally, if the pump will operate continuously or in a high-demand environment, the trade-offs in energy efficiency and maintenance frequency should be carefully considered.

---

### **Recommendation**

- Your application requires **less than 20 GPM and under 100 feet of head** (adjust based on specific system requirements).

- You need a **reliable, low-maintenance pump for clean or mildly abrasive fluids** (with proper filtration).

- Budget is a concern, and you prioritize **upfront affordability over long-term energy savings**.

- The pump will be used in a **non-critical or intermittent duty cycle** (e.g., seasonal irrigation, backup water supply).

- Your application demands **higher flow or head**, requiring a larger or more powerful pump.

- Energy efficiency is a priority, and you are willing to invest in a **higher-efficiency model** (e.g., Grundfos or KSB pumps with VFD compatibility).

- The fluid being pumped is **highly abrasive or contains large particles**, necessitating a more robust or sealed pump design (e.g., a magnetic drive pump).

- You require **extended warranties or lower maintenance**, which may justify a premium pump upfront.

- Always verify the pump s **curve chart** (flow vs. head) to ensure it matches your system s requirements.

- Install **proper filtration** to protect the pump from abrasive particles.

- Consider adding a **VFD** if variable flow control is needed, as it can improve efficiency and extend pump life.

- Regularly inspect **seals, bearings, and alignment** to prevent unexpected downtime.

Details:

The shaft spins smoothly by hand with no grinding or bearing noise. Phase: 3-Phase. Speed: 3450 RPM High Head. Horsepower: 1.5 HP.

This is a used surplus unit that has been mechanically inspected. The internal impeller is clean and free of debris. Technical Specifications: Motor model: Bluffton. Pump End: Stainless Steel Wet End.

part #: 2st1f2d4 prices

• $225.00-$1999.00

specifications hydraulimoto:

• brand: Goulds
• mpn: 2st1f2d4
• part type: Hp Pump

seller hydraulimoto:

• city: Hustisford, Wisconsin
• rating: 99.4%
• # reviews: 548

payments hydraulimoto:

• credit card: Visa
• other
• wallet: Paypal

shipping hydraulimoto:

• cost: $72.29
• type: Calculated
• transit: 5-11 Days
• carrier: USPS
• class: Standard
• service: USPS Ground Advantage

offer hydraulimoto:

• best offers: True
• options: Ship-to-home
• availability: In Stock
• sold: 0
• started: April 25, 2026
• quantity: 1

general hydraulimoto:

• condition: Used
• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Motors

returns hydraulimoto:

• policy: No Returns

Goulds 2ST1F2D4 Is Similar To:

• 10k55 Goulds Pump S Model (28.6% similar) Fob phoenix. System ships via USPS and FedEx ground express. Goulds pumps model: 10K55 meh seal kit. Buyer has option to select alternate transport carrier at expense...(June 30th, 2017)
• Goulds M15432 Centripro Submersible 4 Inch Pump 1.50 Hp 230 Volts 3 Phase (40.5% similar) Part #: Goulds M15432 for sale...(November 18th, 2023)
• Centripro M10434 Goulds 4 Inch Motor Submersible Pump (28.6% similar) New open box...(December 21st, 2024)
• Goulds Ehn-b31vhmr Pump 2mc1e4e0 1hp 1-1 4x1-1 2 Single Phase New In Box (31.6% similar) 1/60/115-230 te 4.25. Location: blue PALLET#5. 1 hp, single phase centrifugal cast pump. Us motor C63CXHRH-5106...(July 11th, 2025)