EATON 990016-000 End Cover Bearing Kit 5433/6433

( Brand: Eaton ), ( Manufacturer Part Number: 990016-000 ), ( Part Type: Cover Bearing )

Review EATON End Cover Bearing Kit 5433/6433 Series

The **Eaton 990016-000 End Cover Bearing Kit** is a precision-engineered maintenance kit specifically designed for Eaton s **5433 and 6433 series** hydraulic pumps, ensuring optimal performance, extended component life, and reliable operation in demanding industrial applications. This high-quality kit is meticulously crafted to replace worn or damaged end cover bearings, seals, and associated components, mitigating potential failure points that could lead to costly downtime or hydraulic system inefficiencies. The kit includes a **sealed bearing assembly**, typically featuring a robust **ball or roller bearing** housed in a corrosion-resistant housing, along with a **replacement end cover gasket** and **sealing rings** to prevent fluid leakage while maintaining proper hydraulic pressure. Engineered to meet strict manufacturing tolerances, these components are built to withstand the high pressures, temperatures, and cyclic stresses common in heavy-duty hydraulic systems, such as those found in construction equipment, agricultural machinery, or material handling applications. The bearing kit is compatible with Eaton s **5433 and 6433 pump models**, which are widely used in applications requiring precise fluid control, such as lift mechanisms, hydraulic cylinders, and power steering systems. By installing this kit, operators can restore smooth operation, reduce friction-induced wear, and enhance the overall efficiency of their hydraulic systems. Proper installation, following Eaton s recommended procedures, ensures that the new bearings align correctly with the pump shaft and housing, preventing misalignment-related stress that could compromise performance. Whether used during routine maintenance or as part of a corrective replacement, the **Eaton 990016-000 End Cover Bearing Kit** serves as a critical upgrade for maintaining the longevity and reliability of hydraulic equipment, helping to minimize operational disruptions and maximize productivity in industrial settings.

### **Pros and Cons of buying a Eaton 990016-000 End Cover Bearing Kit for 5433/6433 Engines**

1. **Direct OEM Compatibility** Eaton (now part of Caterpillar) manufactures this part specifically for the 5433 and 6433 engines, ensuring a perfect fit and reliable performance. Aftermarket parts may not match the original design as closely, potentially leading to leaks, misalignment, or premature wear.

2. **High-Quality Materials** Eaton uses durable materials in its end cover bearing kits, designed to withstand the high pressures and temperatures found in marine and industrial engines. This reduces the risk of failure over extended use.

3. **Sealing and Lubrication Benefits** The kit includes seals and bearings that help maintain proper lubrication within the engine, reducing friction and preventing metal-to-metal contact. This extends the life of the crankshaft and other internal components.

4. **Ease of Installation** The end cover bearing kit is designed for straightforward replacement, often requiring only basic tools. Many users report that the process is simpler than expected, especially when compared to more complex engine overhauls.

5. **Warranty and Support** Eaton (Caterpillar) parts typically come with manufacturer warranties, providing some assurance against defects. Additionally, Eaton s technical support can assist with installation questions or troubleshooting.

6. **Compatibility with Common Modifications** Since the 5433 and 6433 engines are widely used in marine, power generation, and industrial applications, this part is readily available from authorized dealers and online retailers, reducing lead times.

7. **Prevents Costly Damage** Worn or failing end covers and bearings can lead to catastrophic engine failure, resulting in expensive repairs. Replacing this kit as part of routine maintenance prevents such scenarios.

---

1. **High Upfront Cost** Eaton parts are premium-priced compared to some aftermarket alternatives. For budget-conscious buyers, this may be a significant investment, especially if the engine is older or not in high-demand use.

2. **Limited Availability Outside Authorized Channels** While widely available, purchasing from unauthorized sellers risks receiving counterfeit or substandard parts. Always buy from reputable dealers or directly from Eaton/Caterpillar to avoid this risk.

3. **Installation Skill Dependency** While the process is manageable, improper installation such as incorrect torque settings, misalignment, or improper sealing can lead to leaks or premature failure. Those without mechanical experience may need professional assistance, adding to labor costs.

4. **Potential for Overkill on Smaller Engines** If the engine has been well-maintained and the end cover/bearing wear is minimal, replacing the entire kit may be unnecessary. In such cases, a partial replacement (e.g., just the bearings) could suffice, saving money.

5. **Compatibility with Modified Engines** Some aftermarket modifications (e.g., forced induction, custom crankshafts) may not align perfectly with the original Eaton design. Always verify compatibility before purchasing.

6. **Lead Times for Special Orders** While stock parts are usually available quickly, rare or discontinued variants may require longer lead times, delaying repairs or maintenance schedules.

7. **Environmental and Disposal Considerations** Eaton parts, like all engine components, contain metals and fluids that require proper disposal. Buyers must ensure they follow local regulations for recycling or hazardous waste disposal.

---

### **Conclusion**

The **Eaton 990016-000 End Cover Bearing Kit** is a high-quality, OEM-specified part that offers reliability, durability, and compatibility for the 5433 and 6433 engines. Its benefits in preventing engine damage and ensuring long-term performance outweigh the higher cost for most serious operators. However, the expense and installation requirements may be prohibitive for casual users or those on tight budgets.

For **marine applications, industrial power generation, or high-use engines**, this kit is strongly recommended as a proactive maintenance measure. For **older or low-use engines**, a cost-benefit analysis is advised consider whether the wear justifies a full replacement or if partial repairs would suffice.

### **Recommendation**

- **Buy from an authorized Eaton/Caterpillar dealer or a trusted marine/industrial parts supplier** to ensure authenticity and warranty coverage.

- **Follow the manufacturer s installation guidelines meticulously**, including torque specifications and seal application, to avoid leaks or misalignment.

- **Pair this replacement with a full engine service** (e.g., oil change, filter replacement, and inspection of related components) to maximize the kit s effectiveness.

- **If budget is a concern**, explore aftermarket options (e.g., **BorgWarner, JTEKT, or reputable marine bearing brands**) that offer comparable performance at a lower cost, but verify compatibility and warranties first.

- **Document the replacement** in your engine logbook for future reference during maintenance cycles.

For most operators running 5433/6433 engines in demanding conditions, the **Eaton kit is the best choice** for long-term reliability and peace of mind.

Details:

EATON END COVER BEARING KIT FOR 5433/6433 SERIES 990016-000. Form, fit, and function the same, at a substantial savings. Stock Image Shown.

part #: 990016000 prices

• $99.99-$220.41

specifications hydraulimoto:

• brand: Eaton
• mpn: 990016-000
• part type: Cover Bearing

offer hydraulimoto:

• best offers: True
• options: Ship-to-home
• quantity: 2
• started: June 1, 2026
• availability: In Stock
• sold: 0

seller hydraulimoto:

• # reviews: 7038
• city: Clinton Township, Michigan
• rating: 99.7%

general hydraulimoto:

• condition: New
• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Motors

shipping hydraulimoto:

• type: Calculated
• carrier: UPS
• service: UPS Ground, UPS Next Day Air
• cost: $24.56
• class: Standard, One-day
• transit: 3-8 Days

payments hydraulimoto:

• wallet: Apple-pay
• credit card: Mastercard
• other

returns hydraulimoto:

• policy: No Returns

Eaton 990016-000 Is Similar To:

• 101-1012 Danfoss Hydraulic Motor Eaton Used Series (25.7% similar) Lbs rpm continuous: 353RPM intermittent: 471GPM 15GPM 20 ports: sae 10 o-ring port mount: 4 bolt shaft: 1 motor is missing tag displacement: lbs torque intermittent: 2824 in. Good used char-Lynn Eaton hydraulic motor. 7 IN3 rev psi continuous: 1650PSI intermittent: 2250TORQUE 2059 in. Removed from a...(January 28th, 2019)
• 101-1033-0006 Eaton Hydraulic Motor For (32.7% similar) hydraulics division Eden prairie, MN feature code product m hydraulic motor series H0DISPLACEMENT CM3 r 8 IN3 r mounting type AA 2 bolt std DOA. B DOA UNC-2B hole in shaft end port type AA. Low-speed high-torque motor 2 bolt standard 11-APR-02 side port type minimum oil viscosity 100 SUSE Eaton ...(November 4th, 2018)
• 101-1040-009 Char-lynn Eaton H Series (27.1% similar) 6 cu in mounting - sae a 2 bolt shaft 1 DOA. You are buying on new char-Lynn Eaton,series, LSAT hydraulic motor P/N model code - MH0226AA01AA 000AA00JSERIES displacement we combine shipping for multiple items. Straight keyed rotation bi-directional ports sae o-ring max speed 152MAX flow 15 GM cont ...(July 19th, 2017)
• 101-1083-009 Eaton Series Hydraulic Motor (24% similar) To get a correct and accurate shipping quote your destination, enter country zip postal code information into the calculator...(January 11th, 2019)
• 101-2176-009 Eaton Hydraulic Motor Used Series (41.9% similar) 9 IN3 rev psi continuous: 1800PSI intermittent: 2400TORQUE 1368 in. Removed from a machine that was in working order displacement: good used char-Lynn Eaton hydraulic motor. Lbs rpm continuous: 585RPM intermittent: 701GPM 15GPM 18 ports: sae 10 o-ring port UNF-2BCASE drain: keyed. Lbs torque ...(January 28th, 2019)
• 101-2837-009 Eaton Hydraulic Gerotor Spool Valve Motor Series (35% similar) Please look over the pictures closely, photos of this item are actual being sold. Products configure motors details comes as picture shows. Low-speed high-torque shaft type: straight with wood ruff key. Eaton - char-Lynn hydraulic grotto spool valve motor h-series 101 P/N...(October 10th, 2018)
• 101-3624-009 Eaton Char-lynn H Series (37.5% similar) 5-6H o-ring ports case flow OPTIONS00NONE OPTIONS0NONESHAFT OPTIONS0NONESEAL OPTIONS00STANDARD seals speed sensor OPTIONS00NONEVALVE OPTIONS00NONESPECIAL features hardware 00NONE specified special assembly INSTRUCTIONS0NONEPAINT packaging low gloss black. Output SHAFT0125. You are buying an: Eaton...(July 6th, 2017)
• 101-3803-009 Char-lynn Eaton H Series (27.1% similar) 3 cu in mounting - 4 bolt shaft 1 straight w key ports end ports sae o-ring max speed 469MAX flow 15 GM cont interim max torque lb-in differential pressure 1000 psi seal guard option free shipping in the USA only...(September 30th, 2017)
• 103-1006-012 Char-lynn Eaton S Series (27.1% similar) We combine shipping for multiple items. 7 cu in max speed rpm flow - 15 GM cont interim torque lb-in pressure psi shaft 1 straight w wood ruff key ports PDF mount 4 bolt flange...(October 11th, 2017)
• 103-1011-012 Eaton Series Motor Str Key Ports (23.1% similar) UNC-2B mounting holes on 82. Nameplate options none specified design code m twelve 12. Output shaft IN3 r mounting type BA 4 bolt std genuine Eaton char-Lynn's series motor 7 CID,4-BOLT, DOA straight, wood ruff key. B UNC-2B hole in shaft end port type AA UNF-2B sae o-ring ports case flow options ...(February 17th, 2019)
• 103-1013-012 Eaton Series Motor Str Key Port (23.3% similar) DOA nameplate options none specified design code m twelve UNC-2B hole in shaft end port type AA pilot. 4 IN3 r mounting type BA bolt std output shaft straight, wood ruff key. Genuine Eaton char-Lynn's series motor x UNC-2B mounting holes on CID,4-BOLT,1. 00STR key, 10SAE oaring ports stock image ...(February 16th, 2019)