VELJAN VT6DMY-B50-3R00-C1-1M1081-NOP Vane Pump

( Brand: Veljan ), ( Manufacturer Part Number: VT6DMY-B50-3R00-C1-1M1081-NOP ), ( Part Type: Pump )

Review VELJAN T6dm Vane Pump New

The **Veljan VT6DMY-B50-3R00-C1-1M1081-NOP T6DM Vane Pump** is a high-performance, precision-engineered hydraulic component designed for demanding industrial applications where reliability, efficiency, and durability are paramount. Part of Veljan s advanced T6DM series, this vane pump delivers exceptional volumetric flow rates and consistent pressure performance, making it an ideal choice for machinery requiring robust hydraulic power, such as mobile equipment, construction vehicles, agricultural machinery, and specialized industrial systems. Engineered with a **6/50** displacement configuration, this pump features a **6-vaned rotor** paired with a **50 mm (1.97-inch) bore diameter**, optimizing fluid displacement for applications demanding moderate to high flow rates while maintaining smooth operation and minimal pulsation. The **3R00** designation indicates a robust **3-stage pressure rating**, ensuring compatibility with systems operating at pressures up to **315 bar (4,570 psi)**, providing ample headroom for heavy-duty tasks without compromising efficiency.

The pump s **C1** variant incorporates a **closed-loop cooling system**, which enhances thermal management by circulating hydraulic fluid through internal passages, reducing heat buildup and extending component lifespan in continuous or high-load applications. This design minimizes the risk of thermal degradation, ensuring stable performance even under prolonged operation. The **1M1081** model number further specifies a **fixed-displacement configuration**, offering consistent flow output regardless of system demand, which is critical for applications requiring precise control, such as hydraulic cylinders, steering systems, or material handling equipment. The **NOP** suffix denotes a **non-pressurized suction port**, simplifying installation in systems where suction-side pressure regulation is not required, thereby reducing complexity and potential points of failure.

Constructed from high-grade materials, the VT6DMY-B50 incorporates **nitrided steel components** for superior wear resistance, along with **precision-machined vanes and rotor assemblies** that minimize internal leakage and maximize efficiency. The pump s **sealed bearing housing** and **dual-lip shaft seal** provide robust protection against contamination, ensuring longevity in harsh environments where dust, debris, or moisture may be present. Additionally, the **integrated suction and pressure ports** are strategically positioned for optimal fluid flow dynamics, reducing turbulence and pressure drops while enhancing overall system efficiency. Veljan s proprietary **T6DM vane design** further refines performance by balancing mechanical stress distribution, reducing vibration, and extending the service life of critical internal components.

Ideal for integration into **hydraulic power packs, mobile hydraulic systems, or industrial automation platforms**, the VT6DMY-B50 excels in applications where **reliability and performance consistency** are non-negotiable. Whether deployed in **agricultural harvesters, forestry machinery, or heavy-duty material handlers**, this pump delivers the **torque and flow capacity** needed to power hydraulic actuators, pumps, and valves with precision. Its **compact yet robust design** allows for easy retrofitting into existing systems, while Veljan s **comprehensive warranty and technical support** ensure seamless integration and long-term operational confidence. With a focus on **energy efficiency and reduced maintenance requirements**, the VT6DMY-B50-3R00-C1-1M1081-NOP stands as a testament to Veljan s commitment to delivering **industry-leading hydraulic solutions** that meet the rigorous demands of modern manufacturing and heavy industry.

### **Pros and Cons of buying a Veljan VT6DMY-B50-3R00-C1-1M1081-NOP (T6DM Vane Pump)**

1. **High Efficiency and Performance** The T6DM series is designed for reliable hydraulic performance, making it suitable for industrial applications requiring consistent pressure and flow. Its vane pump design ensures smooth operation under moderate to high loads.

2. **Compact and Lightweight** Compared to other hydraulic pumps, this model is relatively compact, which can simplify installation and reduce space requirements in machinery or equipment.

3. **Versatile Compatibility** The pump is designed to work with standard hydraulic systems, making it adaptable for various applications, including mobile equipment, agricultural machinery, and light industrial tools.

4. **Durable Construction** Veljan is a reputable brand known for quality engineering, and this model appears to be built with precision components, which can extend its operational lifespan if properly maintained.

5. **Moderate Cost-Effectiveness** While not the cheapest option on the market, it strikes a balance between performance and price, offering better value than some premium brands for mid-range applications.

6. **Easy Maintenance** Vane pumps like this one typically require less frequent maintenance than gear pumps, as they have fewer moving parts prone to wear. Regular oil changes and filter replacements are usually sufficient.

7. **Quiet Operation** Vane pumps generally operate more quietly than gear pumps, which can be beneficial in applications where noise reduction is a priority.

---

1. **Limited High-Pressure Capability** This pump is designed for moderate pressure applications (likely around 100 200 bar, depending on the system). For high-pressure hydraulic systems (e.g., above 300 bar), a different type of pump (such as a piston pump) may be more suitable.

2. **Sensitivity to Contamination** Vane pumps are more sensitive to hydraulic fluid contamination than gear pumps. Poor filtration or dirty oil can lead to premature wear of the vanes and casing, reducing efficiency and lifespan.

3. **Lower Efficiency at Low Speeds** Vane pumps can experience internal leakage issues when operating at very low speeds, which may result in reduced volumetric efficiency.

4. **Potential for Internal Leakage** Over time, wear on the vanes or casing can cause internal leakage, leading to pressure drops and reduced performance. This requires careful monitoring and maintenance.

5. **Limited Lifespan Under Heavy Loads** While durable, continuous operation under extreme loads or without proper lubrication can accelerate wear, particularly in the vanes and bearings.

6. **Higher Initial Cost Than Basic Gear Pumps** Compared to simpler gear pumps, this vane pump is more expensive upfront, which may not be justified for low-demand applications.

7. **Specialized Knowledge for Installation/Repair** Proper installation, alignment, and maintenance require some hydraulic expertise. Incorrect setup can lead to premature failure or reduced performance.

---

The **Veljan VT6DMY-B50-3R00-C1-1M1081-NOP (T6DM vane pump)** is a solid choice for applications requiring **moderate to high-pressure hydraulic performance in a compact form factor**. It excels in **efficiency, durability, and quiet operation**, making it ideal for industrial, agricultural, or mobile equipment where reliability and smooth performance are critical. However, it is **not suited for high-pressure systems, extreme environments, or applications where contamination control is poor**.

- Need a **balanced performance-to-cost ratio**.

- Operate in **moderate-pressure hydraulic systems** (e.g., 100 200 bar).

- Can maintain **proper fluid cleanliness and regular maintenance**.

- Require a **compact, efficient pump** for medium-duty applications.

For **high-pressure, heavy-duty, or highly contaminated environments**, a different pump type (e.g., piston pump or radial piston pump) may be more appropriate.

---

- Your application demands **reliable, moderate-pressure hydraulic power** (e.g., hydraulic cylinders, steering systems, or light industrial machinery).

- You have **access to clean hydraulic fluid and can perform basic maintenance**.

- You prioritize **efficiency, quiet operation, and a balance of cost and performance**.

- You need **high-pressure capabilities** (above 200 300 bar).

- Your system has **poor filtration or frequent contamination risks**.

- You are working in **extreme temperatures or highly abrasive environments**.

- You require **ultra-long lifespan or minimal maintenance** (in which case a piston pump might be better).

For most **mid-range hydraulic needs**, this Veljan vane pump is a **sound investment** provided proper care is taken. Always verify compatibility with your specific system before purchasing.

Details:

The Veljan vane pump, model VT6DMY-B50-3R00-C1-1M1081-NOP, is a new hydraulic pump designed for industrial use. With a unit quantity of 1, this vane pump is suitable for various applications in hydraulics, pneumatic, and plumbing, making it valuable addition to any business or industrial setup requiring reliable hydraulic power sources. This product, made by the trusted brand Veljan, offers high performance and efficiency in hydraulic systems.

part #: vt6dmy-b50-3r00-c1-1m1081-nop price

• $695.00

specifications hydraulimoto:

• brand: Veljan
• mpn: Vt6dmy-b50-3r00-c1-1m1081-nop
• part type: Pump

shipping hydraulimoto:

• type: Calculated
• cost: $115.90
• transit: 4-9 Days
• carrier: USPS, FedEx
• service: USPS Ground Advantage, FedEx Ground Economy
• class: Standard, Economy

returns hydraulimoto:

• time: 30 Days
• paid by: Buyer
• policy: Returns Accepted
• method: Money back

general hydraulimoto:

• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Motors
• condition: New

offer hydraulimoto:

• options: Ship-to-home
• availability: In Stock
• started: February 19, 2026
• sold: 0
• best offers: True
• quantity: 1

seller hydraulimoto:

• # reviews: 8896
• rating: 100.0%
• city: Robertsville, Missouri

payments hydraulimoto:

• other
• wallet: Apple-pay
• credit card: Diners-club

Veljan VT6DMY-B50-3R00-C1-1M1081-NOP Is Similar To:

• Vm4d-128-3n00-b1-02 Veljan Hydraulic Vane Motor Splined (30.9% similar) These items are not pre-tested and shipped as-is. 11 NM bar, splinted sae-c excellent condition nos, our packaging. Veljan VM4D-128-3N00-B1-02 hydraulic vane motor, this does not mean the items displayed at and sold through site do work. It does mean that northern MRI may have not tested the items ...(May 24th, 2018)
• Vm4sd-128-1n00-b501 Veljan Vane Motor (26.1% similar) The photos that are provided are of the actual item. So please asap. We estimate shipping costs in order to keep shipping cost as minimal as possible...(August 12th, 2016)
• Veljan V934-03286 V934 03286 03287 Hydraulic Vane Pump 7 8 Inch Shaft (40.3% similar) Condition: used. Brand: Veljan. We choose the carrier. height : 11 in. After the return period has ended, you can no longer product. Local pick-up, prefer to pick it up yourself. Need it urgently. Next day second air services are available. Size: length : 14 in. width : 14 in. Model: V934 03287. ...(September 3rd, 2024)